LMU+IE1 LMU+IE2

USE:
Designed for a visual and electromagnetic control of liquids in tanks with possibility of sending a luminous/acoustic signal at a distance, or activating or disconnecting the electrical circuit connected to it. The electromagnetic control can be of minimum or maximum (or minimum and maximum). Our electromagnetic Levels are suitable for:
- hydraulic power packs
- tanks containing water, gas oil, mineral oils with viscosity not higher than 80°E and all other liquids except acids or flammable substances.

OPERATION:
When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distance, the contact, activated by the magnet housed in the float, opens or closes. S.P.D.T (exchange) contacts are also provided for.

POSSIBILITIES:
The ranges differ in the number of electrical contacts. In the more complete version (LMU + IE/2) there are two contacts, for minimum and maximum level. On request, they can be provided with a 70 mm long bimetal probe thermometer with Ø 40 mm body in chromed cast brass and scale of 0° to 120°C (the thermometer is incorporated in the clamping union).

VISUAL LEVEL GAUGE CHARACTERISTICS:
The electromagnetic level gauge is incorporated in the connection block; the electrical connector on the side of the level gauge lower block is only for minimum, upper if only for maximum, or on both blocks if minimum and maximum. To have the connector in the best position for connection of the wires (left or right side), just turn the screen 180°. Tubes in methacrylate or pyrex glass. Nickel-plated brass 3/8” GAS thread or AISI 316 s/steel clamping screws.